Biaxial Universal Material Testing Machine

1. Introduction:
Material biaxial loading mechanical properties test system is mainly used for biaxial static tensile or compression test of composite materials, ceramics, rubber, etc. The system has two control modes of force and position shift.

2. Specification:

	HLS-50	HLS-100	HLS-200	HLS-300
Testing load (KN)	50	100	300	600
Testing range	0.4%-10%
Speed(mm/min)	0.01-500
Accuracy class	0.5 Class
Accuracy of displacement(mm/min)	Speed < 0.5, setting as within +-0.5%, speed>0.5, setting as within +-0.2%
Displacement range(mm)	0-200
Displacement resolution (mm)	<=0.001
Centering accuracy (mm)	Center positioning offset range < = 0.05
Displacement synchronous mode	The displacement of the electric cylinder in four directions is synchronous, or it may be synchronized in pairs
The deformation measurement	Strain gauge measuring system and corresponding static strain gauge (optional)
Environmental device	Low temperature environment box -196 degrees, high temperature box room temperature +10 to 350 degrees, (optional)
Dimension(mm)	30003000500	31703150600	32003200600	33003300600