3D Geomechanical Model Simulation System

1. Features:
-Apply the required load or displacement to the model placed in the center of the frame through three sets of motions and their different combinations
-Four combined main frame
-Three-layer combined sub-rack
-External molding method, making models of different thicknesses and complex structures
-Mobile car body transport model
-Equipped with a cantilever crane to meet the needs of hoisting and transportation in the whole area
-Grating micro multi-point displacement acquisition and analysis system and static resistance strain test system
-Design and manufacturing reference standard: GB/T2611 "General Technical Requirements for Testing Machines"

2. Specification:

Model size	2400×2400×2000(/1500/1000/500)
Model size	1500×1500×2000(/1500/1000/500)
Test force	±3000kN (The amplitude fluctuation of dynamic force does not exceed ±1%FS)
Test pressure	Adjustable within 0.04～2.0(8) MPa, Load fluctuation is less than 5%
Test pressure	Adjustable within 0.02 ~ 1.0mpa, load fluctuation is less than 5%
X1/X2 axis (horizontal) load	10000kN/10000kN
Y axis (vertical) load	10000kN
Z1/Z2 Axis (Axial) load	6000kN/600kN
X1、X2、Y direction single cylinder force	500kn
X1、X2、Y direction cylinder no.	60
Z1、Z2 direction single cylinder force	630kN
Z1、Z2 direction cylinder no.	16
Control channel no.	14

Previous:Double station steel bending test machine

Next:Insulator bending and twisting compound testing machine

LEAVE A MESSAGE

You can also contact me via email. My email address is info@shhualong.com